Kutheni usethe ityhubhu yokubuyisela ioli

1.Kutheni usethe ukubuya kweoliityhubhu?

Xa kukho umehluko omkhulu wokuphakama kwimibhobho yenkqubo, ukwenzela ukukhusela ioli efrijini ukuba ibuyele ngokufanelekileyo kwi-compressor kwaye ichaphazele ubomi benkonzo ye-compressor, ityhubhu yokugcina ioli kufuneka ibekwe kumgca wombhobho othe nkqo.

2.Useta nini ityhubhu yokubuyisela ioyile?

1.Xa umamkeli uphezulu kune-evaporator

Kukho ukunyuka okunyukayo phakathi kwe-evaporator kunye nombhobho oyintloko womphunga, kuba ioli ekhenkcezisiweyo ayiyi kunyuka kwaye ikhuphe kwi-evaporator, ngoko iqokelela ezantsi.Xa ioli ekhenkcezisiweyo iqokelela ezantsi kwe-evaporator, iya kuthintela umbhobho womphunga.

Ukuba usete ityhubhu yokubuyisela ezantsi kwe-evaporator, akuyi kuba neoli eninzi egcinwe kwi-elbow.Logama nje ingqiniba sele iza kuvaleka, umahluko woxinzelelo phakathi kweziphelo zimbini wanele ukumpompa i-oyile engumkhenkce elinganiselweyo “impompo” kwingqiniba de umbhobho wokufunxa oxwesileyo utsalwe umva umva kwithambeka sisicinezeli. .

Ukuba unexhala lokuba isikhuphukeli side kakhulu ukufumana impompo phezulu, kufuneka ucinge ngokuseta ityhubhu yokubuya kumgama ngamnye wobude (ofana ne-6-10 m) ukuze icandelo lesikhuphukeli libuyele ngokuthe ngcembe kwi-injini engundoqo. .

2.Xa i-injini engundoqo ingaphantsi kune-evaporator kwaye umehluko wokuphakama mkhulu

Nangona i-oyile engumkhenkce inokuthotywa ibuyele kwi-injini engundoqo ngaphandle kwetyhubhu yokubuyisela i-oyile, kukho ixhala lokuba ukubuya kwe-oyile eninzi kuya kubangela injini ephambili “i-liquid hit”. umgama wobude (ofana neemitha ezi-6 ukuya kwi-10 yeemitha), ityhubhu ye-oyile yokubuya isetelwe ukwenza ukuba icandelo leoli engumkhenkce libuyele ngokuthe ngcembe kwinjini engundoqo.

3.Ukusebenza komthwalo ophantsi

Ioli engumkhenkce iqokelelana kwityhubhu yokubuyisela i-oyile.Ngenxa yokunciphisa izinga lokuhamba.Ioli efriziwe iqokelela kwi-tube yokubuyisela ioli.Ngenxa yokukhawulelana kwesantya sokuhamba, kuqhuba kuphela ukubuya kweoli "ngokude nje ukuba ityhubhu ivalwe kunye nokwahlukana koxinzelelo kuzo zombini iziphelo".

Ukuba isantya se-inhalation sinokunyuswa kwixabiso elikhulu, ngoko akukho mfuneko yokwandisa ityhubhu ye-oyile yokubuyisela.i inyaniso is,Xa umthwalo omncinci isiphumo sokudlulisa ubushushu sangaphakathi sonyusa imveliso yoshicilelo.Imveliso yoshicilelo iyanda kakhulu,Kulula ukwenza uxinzelelo oluphantsi, akukho bushushu obugqithisileyo,Oku kuthetha ukuba isantya sokuthatha umoya silinganiselwe, kwaye kwimeko. umgama omde omkhulu igophe lokubuyisela ioyile kufuneka lisetyenziswe ukubuyisela ioyile ngokuthe chu!

3.Umgaqo-siseko we-tube yokubuyisela ioli

1.Xa kukho umgama omkhulu phakathi kwenkqubo yangaphakathi kunye noomatshini bangaphandle, umbhobho othe nkqo inxalenye yombhobho womoya uya kufakwa kunye ityhubhu yokugcina i-oyile rhoqo ngeemitha eziyi-8 okanye iimitha ezili-10 ukusuka ezantsi ukuya phezulu. ezimbini "U" okanye enye "O" imilo kunye nobude be-3 ~ 5 amaxesha obubanzi bombhobho. Ngelo xesha, yongeza ityhubhu yokugcina ioli kwaye ukhangele ityhubhu ezantsi nangaphezulu kwe-riser.

2.Uyilo lombhobho wokukhupha ufana naloo mbhobho wokubuyisela.Ulawulo lokunciphisa uxinzelelo kufuneka luthathelwe ingqalelo kuyilo lokuqinisekisa ukuba umbhobho wokukhupha unamafutha, ugweme ukuhlaselwa kwamanzi kwaye ugweme ingxolo kunye nokungcangcazela.

Ubungakanani bereferensi yetyhubhu yokubuyisela i-oyile, jonga ityhubhu yokubuya