Industry News

HTI-A SERIES INDUSTRIAL CHILLER&HOW DOES THE CHILLER WORK
by admin on 24-01-13
HTI-A SERIES INDUSTRIAL CHILLER HTI-A series industrial chiller is mainly applied in Plastic & Rubber industry; It can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve t he production efficiency.They are also widely used in Met...
Read more
When do we need two water pumps for internal and external circulation?
by admin on 23-11-09
When encountering a very small or large flow demand, if the flow rate of the matching unit is much greater than or much less than the production flow rate, there are three treatment options: 1. There is no pressure requirement for production water, and the water consumption is too small. A bypas...
Read more
Why Does The Compressor Return Air Frosting?
by admin on 22-12-06
Frosting at the return air port of the cold storage compressor is a very common phenomenon in the refrigeration system. In general, it will not immediately form a system problem, and small frosting is usually not dealt with. If the frost phenomenon is more serious, then ...
Read more
How to Choose The Most Suitable Pump
by admin on 22-12-03
Chilled water pump: A device that drives water to circulate in a chilled water loop. As we know, the end of the air conditioning room (such as fan coil, air treatment unit, etc.) needs the cold water provided by the chiller, but the chilled water will not flow naturally...
Read more
Refrigeration practitioner must master: Data Center Refrigeration System design 40 problems!
by admin on 22-11-29
What are the three necessary conditions for the safe operation of refrigeration system? Answer: (1) The refrigerant pressure in the system shall not be abnormally high pressure, so as to avoid the rupture of the equipment. (2) Shall not occur...
Read more
Different styles of Qatar World Cup stadium cooling system! Let’s find out!
by admin on 22-11-24
Qatar has a tropical desert climate, and even if the World Cup is scheduled for winter, the temperature is not low. In order to provide a comfortable environment for players and spectators, the World Cup stadiums have been equipped with cooling systems in collaboration w...
Read more
Industrial chillers: Where does the global market come from?
by admin on 20-11-04
The latest research on the world industrial chiller market published by Read Market Research shows that the market has achieved a huge recovery from COVID-19. The analysis provides a detailed overview of the current market situation and how all participants have combined their efforts to escape t...
Read more
How will manufacturers break ice in the industrial chiller industry’s “cooling down” in 2020
by admin on 20-07-07
In 2020, the new crown pneumonia epidemic has not only disrupted people’s daily lives, but also affected the sales of the home appliance industry. Even the air-conditioning industry, which is usually hot in sales, seems to be poured into a pot of cold water. According to the data from Aowei...
Read more
How to deal with chiller’s high pressure fault ?
by admin on 19-09-01
High pressure fault of chiller The chiller consists of four main components: compressor, evaporator, condenser and expansion valve, thus achieving the cooling and heating effect of the unit. High pressure fault of chiller refers to the high exhaust pressure of compressor, which causes the high vo...
Read more
Symptom of lack of refrigerant in industrial chiller
by admin on 19-08-25
1.Compressor load increases Although there are many reasons for the increase of compressor load, However, if chiller lack of refrigerant, compressor load is bound to increase. Most of the time if the air cooling or water cooling system heat dissipation is good, it can be determined that the compr...
Read more
Noise generation and processing methods of air cooled chiller
by admin on 19-08-21
Noise annoys people. Continuous noise pollutes the environment. The reasons for the noise produced by the chiller fan can be described as follows: 1.Blade rotation will cause friction with air, or impact. The frequency of the noise is composed of a number of frequencies which are related to the s...
Read more
What are the reasons for the serious shortage of heat transfer in chiller evaporator?
by admin on 19-08-13
There are two reasons for insufficient heat exchange of evaporator: Insufficient water flow of evaporator The main reason for this phenomenon is that the water pump is broken or there is foreign matter in the impeller of the pump, or there is air leakage in the water inlet pipe of the pump (diffi...
Read more